Starting from Zero

The weapons of mass destruction retrieved from Japanese sufferer untold hardships were finally placed on the test bench, but the circle of people standing around were all isolated ten meters away. A telescope-like thing is fixed on each individual's head to observe the weapon of mass destruction at a distance of more than ten meters away, and the specific operation is completed by several sets of robotic arms suspended on the roof.

This robotic arm is not a computer-controlled robotic arm. It is a linkage mechanism composed of ordinary levers, gears and springs. The operator puts his hand into the glove like a manipulator here, and then how he moves, the manipulator arm there will move, it is just a very ordinary mechanical transmission, but the precision we made is quite exaggerated.

The reason why we have to isolate researchers so far from the weapons of mass destruction in front of us this time is actually due to security considerations. The things in front of us are too dangerous after all, so our temporary laboratory has done a little special protection for this. It is not a simple workbench that supports it under the weapon of mass destruction. The thing is actually empty underneath, with a vertical well, which has been pierced through the crust and deep into the mantle.

Once the weapon of mass destruction in front of us has an accident, the entire test bed, including the surrounding three layers of crystal walls, will drop below two thousand two hundred meters underground in five seconds. Depth, in that kind of place, even if it really explodes, it will definitely not hurt people. This is the best protective measure we can think of now, and under normal circumstances, there will not be a problem. The only thing to worry about is that if the explosion of this thing is an instantaneous explosion with zero delay, then we can only count on the three layers of crystal protection. The wall can last for more than a second.

"Should we start dismantling now?" a research player asked.

"Wait a little longer." An NPC scientist's voice came from a crystal communication machine next to him. Go over there, you can wait for a while."

"Don't wait, I'm here." While several people were talking, I just opened the door and walked in.

Several researchers greeted me briefly, and then one of the researchers began to ask: "Then we can start now?"

I nodded and said: "Then what are you waiting for?"

Several researchers quickly ran to their respective operating positions and put their hands in the operating gloves after hearing what I said. Trying to move the fingers, the manipulator on the opposite side immediately moved with accuracy, just as convenient and flexible as the researchers' own hands.

"Okay, ready to start." The best-skilled among a group of researchers said from the console in the center.

Several player researchers around immediately nodded began to concentrate their attention on the central weapon of mass destruction. The researcher in the center was manipulating the manipulator and picked up a cross-shaped screw spinner on the side table while commanding to several others: "Help me stare at the condition monitor, and tell me immediately if there is any change."

"Okay, you just disassemble the cheat, and we will help you watch the status monitoring."

After getting the answer, the person in charge of the operation began to concentrate on controlling the robotic arm, first using the screw The rotator was aligned with the screw hole on the side of the weapon of mass destruction and pressed, and then the crank at the back of the rotator was shaken. It also quickly retreated from the screw hole at the speed visible to naked eye, and finally completely separated from the main body and was removed.

In fact, this kind of screw spinner has the same function as a screwdriver, the difference is that the speed of the screw is much faster than the screwdriver, and more importantly, this thing does not need to hit the screw interface frequently. For some equipment that requires high precision, the spinner is obviously more useful than a screwdriver.

There are not many screws on this weapon of mass destruction on the console, but none of the screws are very long, and the fixation is quite tight, and it may not be possible to get it out with a normal screwdriver.

Soon after dropping a few screws in a circle, the operator immediately used a suction cup to suck the outer shells and pull them out, and a relatively large metal plate was immediately removed. After coming down, several researchers next to him quickly helped to remove several connected metal plates next to the metal plate. The shell of this weapon seems to use the same design as the Luban lock. Except for the first metal plate which is fixed with screws, the remaining metal plates are all pressed down by this metal plate. The fixing parts are also nested one by one, and they are all stuck together. As long as the first part comes down, the following parts fall apart by themselves.

"Why is it such a design?" A researcher looked at the metal guards scattered all over the floor in surprise and asked. Just when the first researcher disassembled the shields, they immediately noticed that the other shields were starting to loosen, so they quickly used their robotic arms to help hold those shields. Who knew they would have already held the entire projectile before they could hold them. Disintegrated, the rustling sound fell to the ground, and the entire internal structure of the projectile was completely exposed to the air.

Several researchers next to them were also dumbfounded by looking at the cover plate all over the floor. They just removed a fixed plate. Didn't expect actually had this kind of reaction.

"Is it designed this way on purpose?" I looked at the researcher over there and said, "I have seen live ammunition shooting before. When this thing explodes, it will spread a kind of particle light to all around. Granules, is it because this thing itself needs to spread and erupt, so a shell that is convenient and quick to fall off is set up?"

After hearing my reminder, several researchers over there began to think. I got up, and then they nodded and said it was probably what I said. After all, the explosive method of this thing is a bit like a cluster bomb. Particles need to be dispersed before the actual killing occurs. In this process, the shell will only hinder the work of its internal components, so It is necessary to let the shell fall off in a very short time, and this kind of nested shell is obviously very suitable for use in this situation, because it can easily dismantle the whole shell. As for the strength of this kind of shell, I don't think it is a problem at all. This thing is a weapon, not an armor. The only function of its shell is to prevent the internal structure from colliding during transportation and launching. This kind of shell is simply not used for protection. In terms of the volume of this thing, even if it is a solid metal rod, it is definitely easy to be destroyed, so for it, protection is actually not important.

After understanding the design of the outer shell, it is the destruction of the real shell structure inside. The internal structure of this thing is quite complicated, using a lot of metal screws and magic fusion agent to connect. The screw is easy to handle, just unscrew it directly, but the magic fusion agent is troublesome.

The attribute of this magic fusion agent is somewhat similar to model glue. Those who have played with plastic assembly models may know that there is a special glue for models. This thing itself does not have any stickiness, it will not stick other things together, but this thing can easily cause adhesion between plastic and plastic. In fact, this glue simply does not make two pieces of plastic stick together, it melts the plastic surface that it touches, and because this model-specific glue has relatively strong volatility, when it naturally volatilizes, the plastic will be dissolved. Re-solidification becomes a whole. It's like two pieces of ice. You press them together, then use fire to melt their contact surfaces, and then freeze again. When the melted ice re-freezes, the two pieces of ice become a piece of ice, and there is even a seam. Can't find it.

This magic fusion agent also has a similar ability. As long as it is the same substance, it can quickly connect the two together, even if you use the ultrasonic flaw detector afterwards, you can’t find the connection trace. Of course, although the internal integration is very thorough, but the outer joints will appear uneven due to the softening process during the connection process, so it is not difficult to find the connection point, it is difficult to cast this kind of connection point with a whole piece. The piece is not much different, even if you find it, you won’t be able to use it.

Although our technicians quickly removed all the screws, the connection points that were connected by the fusion agent caused us a headache for a long time. Finally, it was a remote observation of the disassembly process using the communicator. The NPC technicians thought of a way. The method he proposed is actually very simple, that is, let Gold Devouring Beetle help gnaw off these connection points.

Compared with our equipment, Gold Devouring Beetle's chewing method is more rapid and accurate, and will never bite something that shouldn't be bitten. We must know that these seemingly integrated metal structures are actually not completely solid. Some steel beams and the like have holes in them, and there are wires and the like in these holes. If we let us It is certainly not a problem to install the equipment and remove the steel beam, but it is estimated that these wires will not be expected to stay, they will definitely be cut together. Therefore, we can only rely on the help of the insects to cut the steel beam without hurting the wire.

Next to the steel city is the insect race breeding base of our guild. Gold Devouring Beetle has been helping us mine steel for the steel city, so it is very easy to get a few.

With the help of Gold Devouring Beetle, those steel beams were quickly cut open, and then the researchers carefully combed the lines little by little to find the source and segment the uses of various instruments. Dismantle the ones that can be dismantled and study them, and leave them alone for the ones that cannot be dismantled. Finally, after eight hours of fighting, the first whole weapon of mass destruction has finally become the big one in front of us. Pile of parts.

These are actually not basic parts. The pile in front of us should be said to be only the partitions that we can disassemble initially. Some parts are actually a combination of many things, and there are even parts with different functions connected together. It hasn't been disassembled yet, but because I don't know how to dismantle or dare not dismantle, these things haven't moved.

"Chairman, the only thing we can do so far is here." The several researchers who were already exhausted and almost collapsed at this time all sat on the ground without an image. The thing in front of you is so big, its formidable power is completely equivalent to a small-yield tactical nuclear bomb. If it were you, would you have no burden in your heart if you let you dismantle the nuclear bomb? Because of the burden, these researchers can be said to have been in a state of high mental stress during the entire dismantling process. It is the same as a doctor performing an operation on the operating table. It is really accidentally capable of killing people. However, the doctor did not die by himself, but only died of a person. If they had a problem, not only would they die along with them, and the surrounding people still don’t know how many people would be implicated, so the psychological burden on this group of researchers can be said to be heavy. The burden is even greater than when a doctor performs an operation.

Looking at the tired researcher who seems to fall asleep at any time, I quickly comforted: "It doesn't matter, it's almost the same if you can disassemble it here, you all go to rest first, and I will arrange the next thing."< /p>

"Good guild leader." After a few people answered, they just walked out like walking corpse. Even if they want to rest, they can’t rest here. They still go back to Isinger and use their high level. Hibernation system is better for assisting sleep, and using that thing to assist sleep is much better than sleeping in reality.

They went to rest, but I can't run. The mess in front of me has to be dealt with. First of all, the pile of things piled under the console must be transported away first. This is the metal keel in the weapon of mass destruction and some integral castings without internal structure. These things occupy the interior of the weapon of mass destruction. The proportion is very large, but in fact there is not much technical content, and it is also very safe. Because they were all tied up with weapons of mass destruction before, they couldn't mess around. Now that they are removed, they can of course be sent directly to the new continent research center for analysis and research. Anyway, these things won't explode.

In addition to these fixed metal parts, there are some functional parts inside this weapon of mass destruction, these things are used to control or operate this weapon of mass destruction, and other The lethality itself is not directly related, so it can be regarded as a safety component. These things can also be transported and studied slowly, and there is no need to continue research in the high-risk laboratory here. Although our guild has temporarily repaired such a research room here for this dismantling, it is a temporary thing after all. Various experimental equipment and personnel are not enough, and it is too dangerous here. Those of our guild I dare not let the high level NPC researcher come over, so in order to speed up the research progress, I still have to send things over for research.

After removing these non-explosive or non-destructive parts, there are only two things left on the test bench.

"This is the explosive part, right?" said the researcher who remotely observed the console through the communicator.

I stood in the position of the previous operator, replaced him with the robotic arms, grabbed the two devices connected in series by two supercharged magic wires, and said: "Attention, everyone , The large object on my left hand shows a high-energy response, but the perspective shows that there is only one liquid substance inside the object, without any mechanical parts, and although the object on my right hand is small, its internal structure is very complicated. We I suspect that this is the detonating device. The problem is that the two are connected now. We don’t know how to separate them. Do you have any comments?" (To be continued. If you like this work, you are welcome to come. Starting point (qidian.com) vote recommended, monthly ticket, your support is my biggest motivation.)