The Technology Tree of Xueba

Time passed quickly. Zhou Yu Feng Hai and others observed the preparations of other units and understood the situation of the main units.

At 6:55 pm, Alxa Space Launch Center will begin to transport the space station's standard cabin through the mass projector.

Feng Hai looked at Zhou Yu and said nervously: "The next step is to rely on the performance of your Spark technology. The space station standard cabin was successfully assembled in accordance with the procedures. Our mission was 80% successful."

Zhou Yu patted Feng Hai's shoulder with confidence, and said confidently: "Relax, we have prepared for this moment for a long time. Considering every detail, I am confident that no matter what the situation is, we Can be successful all at once. "

Lu Jinming appeared on the space command center screen.

He took a flying car and quickly rushed from Yanjing to Alxa Space Launch Center. After arriving, he started to arrange the launch of the space station.

Spark Aerospace has drilled many times on launch missions. Engineers have steadily performed every step, and their attitude is relaxed.

Lu Jinminghui reported: "We are ready to complete, no problems were found, and requested to start the launch of the space station standard cabin."

Zhou Yu nodded at him: "The launch of the space station's standard cabin is permitted, and problems are reported at any time."

With the release of Zhou Yu's order, the space station's standard cabin launch mission officially entered the countdown state.

Relevant units of the space station program can understand the situation of Alxa Space Launch Center through the system of the Space Command Center.

Lu Jinming saw that the time had come to 7:00 pm, he immediately gave instructions to the engineer.

"The mass projector fires."

"The mass projector was successfully ignited, and the standard capsule of Nong 1 Space Station began to launch."

"The cargo container was successfully towed by the moon's gravity. The standard capsule of Nong 1 Space Station flew to the designated orbit."

"The cargo box is in a normal attitude and the telemetry signal is tracking normally."

...

"Initial firing of G3's standard cabin cargo box."

"The moon's gravitational capture failed, and the cargo box began to land into the desert."

"The parachute was successfully opened and a search team has been dispatched."

"The project has been postponed in order to prepare for the launch of the standard capsule of Space Station 1.

Zhou Yu stared at the mass-projector containers that were constantly flying into the universe. Some of the containers failed to be launched and could only be pulled by the car back to the Alxa Space Launch Center.

After overhauling them, they relaunched again.

The standard cabin of the space station is very expensive. Even if the country has huge financial resources, it can only make one for each type of space station standard cabin.

Spark Technology can only use various methods to ensure the safety of the space station's standard cabin when the cargo container is not towed by the moon's gravity.

The space station consists of a total of 24 standard cabins, which are living cabin, agricultural cabin, industrial cabin, and scientific research cabin.

There are five living cabins, three agricultural cabins, five industrial cabins, and eleven scientific research cabins.

Alxa Space Launch Center, when inspecting nine space station standard capsules that failed the first launch, the first space station standard capsule that has been launched has reached the established orbit.

The orbital altitude of the space station is 430 kilometers in low earth orbit.

Compared with communication satellites, it is very close to the ground, which is why the mass projector cargo box can be reached quickly.

Feng Hai stared nervously at the picture transmitted from the container.

"I hope everything goes well with the station's standard cabin assembly.

Launch the space station standard module into designated orbit. I understand the capabilities of mass projectors, and it can be done easily.

The most difficult part of the entire space station assembly process is to assemble the space station standard cabin. The more difficult it is to assemble it later. "

The space station's standard capsule is in low-Earth orbit, which is operating at a speed of 7.2 kilometers per second.

The standard cabin is operating at extremely high speeds, and the kinetic energy it carries is enormous.

Once the two standard cabins are not in the first docking process, they are perfectly assembled in a short time.

The standard capsules of these two space stations will be directly damaged by high-speed impact.

Zhou Yu saw Feng Hai's worried eyes, he comforted: "The space station standard cabin, this is our Spark Technology and many domestic scientific research units, design and produce equipment together.

We have made perfect preparations for the assembly of the space station's standard cabin, which can guarantee perfect assembly every time. "

Feng Hai heard Zhou Yu's introduction, calmed down, and watched the movement of the mass projector container.

After the mass projector container reached the designated orbit, it began to release the space station's standard capsule.

The mass projector container is still connected to the space station's standard cabin with metal ropes to direct the space station's standard cabin movement.

The space station's standard cabin adjusts its position in low-Earth orbit.

There are other space station standard cabins one after another, come to this space station standard cabin.

Xinghuo Aerospace has already calculated the orbital positions of the standard cabins of various space stations.

The rear-launched mass projector cargo box directly took the new space station standard capsule to the space capsule of the previously launched space station.

Five living capsules make up the main structure of the space station, and the standard capsule of Sheng No. 1 Space Station and the standard capsule of Sheng No. 2 space station begin to dock.

The docking of the two space station standard cabins is done by a computer inside the mass projector container.

By calculating the attitudes of the two space station standard cabins, while keeping the two space station standard cabins relatively stationary, the docking position remains stable.

In response to the docking problem of the space station's standard cabin, Spark Technology has developed a completely passive mechanical structure.

Passive optical sensors allow the docking of the two space station standard cabins to be within 10 microns.

At the moment of docking, the mechanical structure responsible for the docking was immediately locked, allowing the standard capsules of the two space stations to complete the docking work.

Zhou Yu saw the space station as a building block, and spliced ​​the standard cabins to the gradually formed space station according to the established procedures.

Only when all space station standard cabins are docked can a space station meet the requirements.

The construction of the space station has come to a late stage. Because of the influence of the space station's own structure, it has become increasingly difficult for UU to read the book www.uukanshu.com to maintain a standard attitude.

In the later installation of the space station standard module, not only to find its own docking position, but also to adjust its attitude at all times to prevent collision with other standard modules.

After two days and two nights of docking, all the standard cabins of the space station were docked and they were formally formed into a space station.

Feng Hai saw that the space station was formally completed, and he breathed a long breath: "The space station's establishment work has finally been completed, and the biggest obstacle of the space station plan has passed."

Zhou Yu also smiled and said, "This success has accumulated enough experience for us, and I believe it will be easier in the future.

But this is not the time to relax. We don't know yet whether the space station's standard cabin can be successfully launched.

It is very difficult to install the space station standard cabin, but it is even more difficult to replace the space station standard cabin. "

Feng Hai excitedly pressed the button of the control center.

"Activate the space station's standard module and the space station performs a self-test."