The rise of great powers: starting from military industry

Liu Tao introduced his plan for the proposed tank factory based on the drawings.

He just looked at the design team's preliminary plan and felt that it was not feasible.

Such a tank factory can produce Type 59 and Type 69 tanks without any problem, and can also produce some special vehicles.

But there is no doubt that it cannot produce Type 80 self-propelled anti-aircraft guns and Type 80 main battle tanks.

If it is built, it will be difficult to change it.

Even if it takes a lot of effort in the end, it is estimated that the production capacity of self-propelled anti-aircraft guns and tanks is not satisfactory.

In this case, it is natural to combine his ideas.

After all, this is a tank factory that requires an investment of 1 billion yuan. The money is not blown by the wind, and Liu Tao will feel distressed if he spends money indiscriminately.

In the next few days, Liu Tao was together with the design team to communicate about the design plan and express his opinions.

After three days of discussion, Liu Tao temporarily put the matter aside after confirming that the design team grasped his ideas.

It will take at least two months for the design team to complete the design drawings.

Naturally, Liu Tao could not keep an eye on this matter.

Because the first phase of the other three factories had been completed, the equipment had to be installed, and some workers had to be transferred to the two factories. Both factories were military factories specializing in the production of weapons.

After the completion of the first phase, the second and third phases of the project were to be built. Once completed, the scale of the three factories would not be smaller than the current Panshan Machinery Factory.

Like the Panshan Machinery Factory, the two factories produced firearms and ammunition.

He had to be busy with the deployment and arrangement of this matter!

In addition, the Panshan militia camp had to be disbanded, the militia returned, and the Panshan Machinery Factory had to form a guard camp, one for each factory, with a total size of a regiment.

Although the military representative contacted the military for this matter, Liu Tao also had to come forward.

In addition, he had to be busy with CNC machine tools.

There was not much time left for him, but he had to produce the Type 80 main battle tank and the Type 80 self-propelled anti-aircraft gun.

Liu Tao wished that he could be split in half or even ten halves to use.

This is because he provided the design information and commissioned other factories to produce various types of shells, otherwise he would be even busier.

Even if there are complete design drawings now, the quality of many parts of tanks and self-propelled anti-aircraft guns produced by other factories is not good, and Liu Tao has to produce them himself, and then optimize and improve them through the system.

As for the production of tanks, even if the Fifth Machine Department mobilized a group of engineers to come to the Fifth Machine Department, the output of tanks will still be very slow.

Engines, main guns, turrets, tracks, armor, fire control systems, etc., there is nothing that Liu Tao doesn't have to worry about.

That's it, one self-propelled anti-aircraft gun and tank a month has exhausted him.

It is precisely because of this that Liu Tao feels more and more the importance of the country's industrial level.

If it is thirty years later, there is no need for such trouble. Many parts can be processed in factories outside. They only need to process the core parts and carry out general assembly.

But it's not possible now, and you have to rely on yourself.

Liu Tao knew that the aviation and aerospace systems could complete a lot of parts processing, but the problem was that they were in different systems and isolated from each other. The Fifth Ministry of Machinery would not care about their reputation. Even if he wanted to order a batch of parts and contacted them in the name of Panshan Machinery Factory, they would not care about Panshan Machinery Factory at all.

Firstly, they were not in the same system, and secondly, Panshan Machinery Factory was only a deputy department-level unit, while those state-owned aviation and aerospace factories that could process were at least full department-level units, or even deputy department-level units.

As a result, Liu Tao had to contact the Third and Seventh Ministry of Machinery through the Fifth Ministry of Machinery.

Even so, it was still not very smooth.

In the busyness, time passed bit by bit, and it was already September before we knew it.

Shichahai, with the start of the new semester of the university, has resumed its bustle.

Zhu Lin, who is already six months pregnant, has a bigger belly.

Liu Tao and Zhu Lin are walking slowly.

Every month when he returns to Beijing for vacation, it is the time when Liu Tao relaxes the most and takes a good rest to adjust his state.

Otherwise, he feels that he will be crushed by the strong pressure after working for a long time and at high intensity.

Every time he returns to Beijing for vacation, he can't help but feel tired when he sees his beautiful wife. The greatest pleasure is to be with his beautiful wife. Every night, he puts his ear to her belly and tries to listen to the sound of fetal movement.

Every time he puts his hand on his belly, he seems to feel that the child inside has a special connection with him.

"What do you think this special economic zone is for?" Zhu Lin took Liu Tao's hand and talked about the recent major events in China.

Just a few days ago, the 15th meeting of the National Senior Officials' Meeting decided to set up special economic zones in Pengcheng, Zhushi, and Qicheng in Guangdong Province and Ludao in Fujian Province.

This matter has spread all over the country with major newspaper reports and radio reports.

Special economic zones are new things.

Everyone talks about reform and opening up, but what is reform and opening up? In fact, most people don't know, and they will be at a loss when talking about reform and opening up.

As for special economic zones, they are unheard of and unseen.

There are many different opinions on the establishment of special economic zones.

No one would have thought that the establishment of special economic zones would actually give birth to a first-tier city! Among the first four cities to establish special economic zones, except for Qiecheng which was burned down by a fire, the worst ones have become new first-tier cities.

"The special economic zones are exploring economic construction and using the market economy to supplement the development of the national economy." Liu Tao smiled and said simply.

"The spring breeze of reform and opening up has blown across the land of China. The days in the future will definitely get better and better, and everyone's life will become easier." Liu Tao said with a smile, "Let's find a time next year and let's go on a trip."

"You are so busy with work now, how can you have time to travel?" Zhu Lin rolled his eyes at Liu Tao.

Liu Tao said: "No matter how busy I am, I still have time to take a vacation. My body is not made of iron."

"Look at me every month, don't I go back to Beijing for vacation as usual?" Liu Tao said: "By next year, I shouldn't be as busy as now."

Liu Tao had a look of expectation in his eyes.

In the past few months, he was so busy that he couldn't even touch his feet and slept only four hours a day.

There are constantly CNC machine tools being built by him.

CNC lathes, CNC drilling machines, CNC milling machines, CNC grinders, CNC boring machines and machining centers.

There are also metal forming CNC machine tools, CNC bending machines, CNC combination punches, CNC pipe bending machines, CNC rotary head presses, CNC cutting machine tools, CNC EDM machine tools, CNC flame cutting machines, CNC laser cutting machines, special Combined machine tools, etc.

There are even three-axis CNC machines among them!

At the current speed, he will be able to build a five-axis CNC machine tool in about a month.

He believes that by solving the problem of CNC machine tools and five-axis machining centers, he can be freed from a lot of tedious things.

Thanks to Heishi Book Number for the reward of 10,000 coins, to book friend 190331123718038 for the reward of 8,000 coins, and to book friend 20200601190622483 for the reward!

It’s the end of the month, please vote!